Impact Torque Testers TT-IMP

The TT-IMP impact torque wrench test system is specially designed with extra-rugged construction for the demanding job of testing impact tools. The flange-mounted transducer is fixed in a heavy-duty frame designed for secure bench top mounting. A digital display is connected remotely to isolate the electronics from the damaging vibrations caused by impact tools. A specially designed spline drive run-down-fixture simulates real-world application conditions, allowing the impact tool motor to ramp-up to freely rotate several times before building resistance to rotation.
The included digital indicator can display torque in lb-ft, N-m, Lb-in or Kg-m (selectable) with an accuracy of +/-1% (bi-directional with optional reverse threaded run-down-fixture).

The TT-41000 Series impact torque testers are designed to check tool operation and consistency. The measured torque value does not precisely indicate the effective clamp load of the bolt. It is common for tool manufacturer's specified torque output to vary by +/-20% versus what the TT-41000 will indicate however the critical value is repeatability, not measured output.

The TT-IMP is designed for use with impact and impulse tools only. It is not compatible with hand torque wrenches or reaction tools. The display included with the TT-IMP can be used with our IT Transducers to extend its capabilities.

Features
- Counts Pulses / Blows while displaying peak torque
- Heavy Duty Construction
- Solid machined aluminum plate for weight reduction and long term durability
- Spline engagement of rundown into torque transducer improves durability of transducer
- Test stand is designed with feet to accomodate bolting test stand to bench
- Supplied as a complete system with bench-mount transducer, run-down-fixture, display and connecting cable.

Custom ranges available, inquire for details

TT-IMP Options
The test stand can be connected to the MTM or TT-3000 torque testers with external port option. They can also be configured with digital output for connection to a tablet or direct to your PC with our Tools software application. Inquire for details.

Notes for Impact Testing
Set filter on AWS-4050 Torque Display to 1000 Hz
Back off run-down between each test
Be aware of heat build-up, it breaks down the lubricant in the run-down fixture, increasing friction. Let the run-down cool after a few minutes of use (this will vary by torque range)