NDT เครื่องวัดความหนาระบบอัลตร้าโซนิค Ultrasonic Thickness Gauge NOVASCOPE-6000

High precision ultrasonic thickness gage with a substantial amount of adjustable settings and parameters to accomplish most UT thickness measurement applications.
It is the most comprehensive instrument of NDT Systems’ current thickness gage product line.

- Class leading ultra thin spatial resolution
- High-Resolution (0.0001in, 0.0025mm)
- Multi-probe capability
- Touchscreen controls
- 0.0001" (0.0025 mm) digital resolution; as low as 0.010" (0.254 mm) thickness resolution
- Compatible with contact, delay line or immersion transducers
- Dual-Trace display; A-Trace and gates
- Displays English or Metric units
- Velocity display (quartz-stabilized, digital)
- Full RF or rectified RF display
- Selectable multiple echo interval
- Receiver attenuation control plus manual gain and Automatic Gain Control (AGC)
- TAC (Thickness Amplitude Compensation) for noise suppression
- Outputs: Alarms, USB, Serial RS-232C, Micro HDMI


Single or Dual Element: Can use both single & dual probes	Alarm mode: Alarm mode on limits	Variable Units: Change between mm/ inch


Multi-Probe: Can use multiple probe types	Data Transfer: Can be connected to PC	Adjustable Velocity: Velocity can be adjusted


Benchtop: Designed for benchtop use	Adjustable Gain: Gain can be adjusted	Thru Coating mode: Can measure through coatings


High Resolution: Resolution to 0.0001 inches	Min/Max Mode: Measures max and min thickness

Specification

Dimensional Readout		English and Metric Gaging Range English: 0.005-10 inches; Metric 0.13-100 mm (depending upon material)
Digital Resolution	English Units	± 0.0001" on 1" range ± 0.001" on 10" range
	Metric Units	± 0.001 mm on 10 mm range ± 0.01 mm on 100 mm range
Measuring Mode		Sets mode for contact, delay line or immersion transducers
Readout Mode		Selects digital display for thickness or velocity
Pulser	Risetime	5 ns
	Amplitude	150, 250, 400 volts Peak into 50 Ohms
	Repetition rate	625, 1250, 2,500, 5000 Hz
	Damping	15 to 520 Ohms - 1 Ohm increments
Receiver	Adjustable gain	100 dB
	Automatic gain control	100 dB dynamic range
	Reject	Variable threshold to full scale
Bandwidth	Bandwidth	30 MHz (3 dB down)
Attenuator	Attenuator	0, 10, and 20 dB selectable
A-Trace Display	Sweep width	Switchable down to 50 ns/Div Continuously adjustable
	Sweep delay	1 ms to 80 ms
	Display	Dual Trace; A-Trace plus selectable Gate Traces (IP, IF, T or TAC)
	Display modes	Full wave RF, positive or negative Rectified
T-Gate		Thickness gate with adjustable sync
T-Gate Start/Stop		Selectable on positive or negative half cycles
IP-Gate		0.25 to 20 ms (contact), 1.0 to 0 ms (continued) (delay or immersion)
IF-Gate		0.1 to 8.0 ms
TAC-Gate		Adjustable thickness amplitude Compensation of gain Start control: 0.02 to 6 ms Amplitude control: 0 to 100 dB Slope control: 0.1 to 50 ms
Alarms		Three functions: LO, HI, LO/HI
Outputs		Alarms, Serial RS-232C, IP Sync and USB
Inputs		External sync
Power Source	Power Source	Battery & AC
Power Consumption		50 Watts
Warranty		One year