Mask Synthetic Blood Penetration Tester Mask Synthetic Blood Penetration Tester
สามารถติดต่อสอบถามได้ที่ 02-9744354-6 สายด่วน 088-7777277
Use Mask synthetic blood penetration tester is used to determine the penetration performance of synthetic blood and other liquid-derived liquid jet, so as to evaluate its safety and protection performance.It is suitable for the determination of penetration of synthetic blood spillage in medical masks.It is widely used in the medical inspection department, safety inspection department and scientific research institute Executive standard: YY 0469-2011: surgical masks for medical use Gb19083-2010: technical requirements for medical protective masks; YY/ t0691-2008: test method for the penetration of synthetic blood (fixed volume, horizontal injection) in the medical mask of protective equipment for infectious pathogens;
Technical parameters Test environment: temperature (21±5)℃;Relative humidity (85±10)% Spray distance: (300±10)mm Nozzle diameter: Φ 0.84 mm, 12.7 mm long Liquid injection speed: 450cm/s;550 cm/s;635 cm/s Spray pressure: standard 10.7kpa 16kpa 21.3kpa/adjustable Power supply: AC (110~240) V 50Hz Overall dimensions: 650×200×340 mm
Product features: 1. The air pressure range can be set freely, and the setting range (0.5-- 30)kPa; 2 touch screen Chinese display, friendly man-machine interface operation, aluminum alloy panel, equipped with metal keys, to ensure the durability of the instrument 4. The sample table is made of 304 stainless steel, which is light, clean and never rusted. 5. Constant pressure injection device, without manual adjustment Gb19083-2010 technical requirements for medical protective masks Synthetic blood penetration test; 2 mL synthetic blood was sprayed into the mask at a pressure of 10.7 kPa (80 mmHg). No infiltration should occur inside the mask. YY 0469-2011 synthetic blood penetration test of surgical masks: 2 mL synthetic blood was sprayed into the mask at a pressure of 16.0 kPa (120 mmHg). No infiltration should occur inside the mask. YY 0469-2011 synthetic blood penetration test of surgical masks: Sample quantity: test with 3 samples. Sample pretreatment: the sample was pretreated at least 4 h at temperature (21)C and relative humidity (85)%, and the test was carried out within 1 min after being taken out. Test process: the sample is fixed on the sample fixture on the instrument, and the 2 mL table is placed 30.5cm away from the sample center The surface tension was 0.002n /m with a pressure of 16.0 kPa (120 mmHg) The needle tube with a diameter of 0.84mm was sprayed in a horizontal direction to the target area of the sample under test. Visual inspection was conducted within 10 s after removal. Result treatment: check the inner side of the sample for penetration.If visual inspection is suspicious, use a absorbent cotton swab or similar to rub the inside of the target area and determine if there is synthetic blood penetration.The results shall meet the standard requirements. |
DRK641 Constant temperature and humidity chamber DRK101 Medical mask universal tenstile testing machine DRK506 Particle Filtration Efficiency Detector(PFE DRK-1000A Anti-Bloodborne Pathogen Penetration Tester DRK-LX Gelbo Flex Tester DRK308 Digital fabric permeability tester DRK206 Mask Gas Exchange Pressure difference DRK260 Respirator Resistance Tester DRK308A- Impact Penetration Tester DRK128 Rotary Color Fastness Friction Tester DRK-1071 Wet-resistant Microorganism Penetration Tester DRK-1070 Resistance Dry State Penetration Experiment DRK-1000 Bacterial Filtration Efficiency Detector DRK313 Mask tightness tester DRK227 Synthetic Blood Penetration Tester DRK703 Mask Field Tester Mask Flame Retardant Performance Tester LR-K013 Mask Airflow Resistance Tester LR-490 Mask Respiratory resistance tester LR-CT60 Protective clothing synthetic blood penetration tester Respiratory resistance tester |