Measuring range 0-1.000Nm/2.000Nm/5.000Nm/10.00Nm/20.00Nm
Resolution 0.001Nm/0.01Nm
torque meter with separate sensor for measuring the torque of screws, components,
screw and plug connectors, drive shafts etc.
Special Features
3 selectable modes :
real time - to display load transients
peak force - to capture the peak force achieved during a test
Auto peak force- display the peak force der 1-10 seconds
Display of opening or close torque (clockwise and counterclockwise torque)
3 selectable units: N.m, Kgf.cm, lbf.in
Storage of 1000 values, which can be recalled:
Output signal:
RS 232 C for connecting to a PC , Digimatic output
high Sampling rate
Programmable high/low set
Alarm indication in display and output signal in case of overload
Manufacturers calibration report is included
Exact measuring with an accuracy of 0.5 %
High repeatability
150 % overload protection
Easy to read LCD display and to use
Operates on rechargeable battery or AC adapter
|