Nitrogen High Temperature Test Chamber
ห้องทดสอบอุณหภูมิสูงด้วยไนโตรเจนถูกออกแบบมาเพื่อทำการทดสอบที่อุณหภูมิสูงในบรรยากาศไนโตรเจนที่ควบคุมได้ การตั้งค่านี้เหมาะสำหรับการประเมินวัสดุและส่วนประกอบภายใต้สภาวะอุณหภูมิสูงและเงื่อนไขเฉพาะ

ข้อมูลจำเพาะของรุ่น
ขนาดภายใน
- AT91-200: ปริมาตรภายใน 91 ลิตร (450 มม. กว้าง x 450 มม. สูง x 450 มม. ลึก)
- AT216-200: ปริมาตรภายใน 216 ลิตร (600 มม. กว้าง x 600 มม. สูง x 800 มม. ลึก)
- AT512-200: ปริมาตรภายใน 512 ลิตร (800 มม. กว้าง x 800 มม. สูง x 800 มม. ลึก)
- AT1000-200: ปริมาตรภายใน 1000 ลิตร (1000 มม. กว้าง x 1000 มม. สูง x 1000 มม. ลึก)
ขนาดภายนอก
ขนาดภายนอกจะแตกต่างกันไปตามรุ่นเพื่อรองรับปริมาตรภายใน:
- AT91-300: (1060 มม. กว้าง x 820 มม. สูง x 635 มม. ลึก)
- AT216-300: (1370 มม. กว้าง x 970 มม. สูง x 785 มม. ลึก)
- AT512-300: (1730 มม. กว้าง x 1210 มม. สูง x 1065 มม. ลึก)
- AT1000-300: (1500 มม. กว้าง x 1480 มม. สูง x 1270 มม. ลึก)
ข้อมูลจำเพาะของอุณหภูมิ
- ช่วงอุณหภูมิ:
- อุณหภูมิห้อง +20 °C ถึง 200 °C
- สำหรับรุ่นที่สามารถเข้าถึงได้ถึง 300 °C ช่วงคือ อุณหภูมิห้อง +20 °C ถึง 300 °C
- การเพิ่มอุณหภูมิและเวลา:
- แตกต่างกันไปตามรุ่น; ตัวอย่างเช่น AT91-200 สามารถทำอุณหภูมิได้ภายใน ≤40 นาที ขณะที่ AT1000-200 ใช้เวลานานถึง ≤60 นาที
ข้อมูลจำเพาะของการไหลของไนโตรเจน
- ความเข้มข้น: ≤100 ppm
- อัตราการบริโภค:
- AT91: ≤7 ลิตร/นาที
- AT216: ≤15 ลิตร/นาที
- AT512: ≤30 ลิตร/นาที
- AT1000: ≤60 ลิตร/นาที
โหมดการควบคุมอุณหภูมิ
- ห้องทดสอบใช้โหมดการถ่ายเทความร้อนด้วยการหมุนเวียนอากาศบังคับร่วมกับระบบทำความเย็นภายใน
- พารามิเตอร์การควบคุม:
- อุณหภูมิ: 5 °C ถึง 36 °C
- ความชื้น: 30% ถึง 85% RH
- ความดัน: 86 kPa ถึง 106 kPa
การใช้งาน
ห้องนี้เหมาะสำหรับการทดสอบความคงตัวทางความร้อนและประสิทธิภาพของวัสดุต่างๆ ในสภาพแวดล้อมไนโตรเจนที่ควบคุมได้ ซึ่งช่วยลดการเกิดออกซิเดชันและปฏิกิริยาอื่นๆ
Technical Specifications
Model |
AT91-200 |
AT216-200 |
AT512-200 |
AT1000-200 |
AT91-300 |
AT216-300 |
AT512-300 |
AT1000-300 |
Internal Volume(L) |
91 |
216 |
512 |
1000 |
91 |
216 |
512 |
1000 |
Inner Dimension (mm) |
W |
450 |
600 |
800 |
1000 |
450 |
600 |
800 |
1000 |
H |
450 |
600 |
800 |
1000 |
450 |
600 |
800 |
1000 |
D |
450 |
600 |
800 |
1000 |
450 |
600 |
800 |
1000 |
Outer Dimension(mm) |
W |
1060 |
1210 |
1500 |
1730 |
1060 |
1210 |
1500 |
1730 |
H |
820 |
970 |
1210 |
1480 |
820 |
970 |
1210 |
1450 |
D |
635 |
785 |
1065 |
1270 |
635 |
785 |
1063 |
1270 |
Temperature Range(℃) |
(Ambient temperature+20~200)℃ |
(Ambient temperature+20~300)℃ |
Temperature Rise and Time(min) |
(Ambient temperature+20~200)℃ |
(Ambient temperature+20~300)℃ |
≤40min |
≤60min |
≤70min |
Residual oxygen concentration≤100ppm, consumption flow of high-purity inert gas(such as: N2) |
≤20L/min(≤50min fall) |
≤50L/min(≤50min fall) |
≤100L/min(≤50min fall) |
≥200L/min(≤50min fall) |
≤7L/min(concentration maintaining) |
≤15L/min (concentration maintaining) |
≤30L/min (concentration maintaining) |
≤60L/min (concentration maintaining) |
Temperature Regulation Mode |
Forced air circulation heat transfer mode & internal cooling system |
Temperature:(5~36) ℃ Humidity: (30~85)%RH Pressure:(86~106)kPa |
Material |
Inner Chamber |
Stainless steel sheet SS304 |
Outer Chamber |
Two-sided galvanved plafe- with electrostatic powder coating |
Thermal Insulation |
High-temperature fiber cotton |
Chamber Door Sealing Strip |
High temperature resistant sealing strip(exclusive of silicon) |
Actuator
|
Fan |
Extended shaft fan |
Damper |
Manual adjustment for ventilation & circulation |
Heater |
Imported nickel-chrome electric heater wire |
Controller System
|
+PLC Touch Screen |
PLC 7.0",800×480 resolution, mixed output PLC |
Running Mode |
Program runs in Auto mode (An entered temperature & humidity program is run) |
Setting Mode |
Simplified Chinese & English,input by touch |
Display Resolution |
Temperature:0.01℃,time: s |
Sensor |
PT100(platinum resistor),K-type thermocouple |
Control Mode |
Anti-integral saturation PID & auto-tuning |
Communication Function |
(Optional)RS485 makes it convenient for remote and local communication monitoring (monitoring software is required; RS485/RS232 converter, one PC computer COM and one USB port are required).Meanwhile, maximum 16 sets can be connected, the maximum length of wire material is 700m. |
Additional Function |
Fault alarm prompt function, upper and lower limit protection fur |
Power Supply(V) |
AC voltage 380V±38V Frequency 50Hz±0.5Hz 3-phase 4-wire & earthing protection |
Maximum Current(A) |
3 |
4 |
7.6 |
9.8 |
4.1 |
5.8 |
9.8 |
14.5 |
Power(kW) |
2 |
2.7 |
5 |
6.5 |
2.7 |
3.8 |
6.5 |
9.5 |
Weight(kg) |
120 |
160 |
280 |
460 |
120 |
160 |
280 |
460 |
Standard Configuration |
2 sets of sample holders, 4 casters, 4 fuses, I set of oxygen concentration analyzer, 3 flow meters, 2 pressure relief valve, I fan speed transmission |
Safety Device |
Leakage switch, motor,phase sequence,over-temperature protection,etc. |
Note:Both the nitrogen inlet pressure and air inlet pressure are 1kgf/cm2.
Overview
The Nitrogen High Temperature Test Chamber is designed for conducting high-temperature tests with a controlled nitrogen atmosphere. This setup is ideal for evaluating materials and components under elevated temperatures and specific conditions.
Model Specifications
Internal Dimensions
- AT91-200: Internal volume of 91 L (450 mm W x 450 mm H x 450 mm D)
- AT216-200: Internal volume of 216 L (600 mm W x 600 mm H x 800 mm D)
- AT512-200: Internal volume of 512 L (800 mm W x 800 mm H x 800 mm D)
- AT1000-200: Internal volume of 1000 L (1000 mm W x 1000 mm H x 1000 mm D)
Outer Dimensions
The outer dimensions vary by model to accommodate the internal volumes:
- AT91-300: (1060 mm W x 820 mm H x 635 mm D)
- AT216-300: (1370 mm W x 970 mm H x 785 mm D)
- AT512-300: (1730 mm W x 1210 mm H x 1065 mm D)
- AT1000-300: (1500 mm W x 1480 mm H x 1270 mm D)
Temperature Specifications
- Temperature Range:
- Ambient temperature +20 °C to 200 °C
- For models reaching up to 300 °C, the range is ambient temperature +20 °C to 300 °C.
- Temperature Rise and Time:
- Varies between models; for example, AT91-200 achieves temperature in ≤40 minutes, whereas AT1000-200 takes up to ≤60 minutes.
Nitrogen Flow Specifications
- Concentration: ≤100 ppm
- Consumption flow:
- AT91: ≤7 L/min
- AT216: ≤15 L/min
- AT512: ≤30 L/min
- AT1000: ≤60 L/min
Temperature Regulation Mode
- The chamber employs forced air circulation heat transfer mode along with an internal cooling system.
- Regulation Parameters:
- Temperature: 5 °C to 36 °C
- Humidity: 30% to 85% RH
- Pressure: 86 kPa to 106 kPa
Applications
This chamber is suitable for testing the thermal stability and performance of various materials in a controlled nitrogen environment, thereby minimizing oxidation and other reactions.
If you need more details or information about specific features, let me know!