Temperature, Humidity and Vibration Integrated Test Chamber TCTH-Series
ห้องทดสอบแบบรวมที่มีอุณหภูมิ ความชื้น และการสั่นสะเทือน
หน้าต่างสังเกตขนาดใหญ่
ล็อคแบบเลเวอร์ที่ไม่เหมือนใคร
เทอร์มินัลควบคุมแหล่งจ่ายไฟของตัวอย่าง
มีโต๊ะสั่นสะเทือน
การป้องกันอุณหภูมิสูงเกินไปแบบอิสระสามชุด
ตัวควบคุมที่พัฒนาโดย Topect

แน่นอน! นี่คือการแปลสรุปคุณสมบัติของ **ระบบควบคุม** และ **การตั้งค่ามาตรฐานพร้อมอุปกรณ์เสริมสำหรับห้องทดสอบอุณหภูมิและความชื้น
ระบบควบคุม
ประเภทของตัวควบคุม
- ตัวควบคุมอุณหภูมิและความชื้นแบบสัมผัส Topect
- ประกอบด้วยหน้าจอสัมผัส, PLC, โมดูลอุณหภูมิ, และโมดูลความชื้น
คุณสมบัติ
- **หน้าจอสัมผัส**: ขนาด 7” TFT แสดงสีจริง 65536 สี ความละเอียด 800×480 มีซอฟต์แวร์แก้ไขภาพที่มองเห็นได้ และโปรแกรมตรรกะ PLC
- **พอร์ต I/O**: สามารถขยายได้สำหรับการปรับแต่ง
- **การส่งออกข้อมูล**: พอร์ต USB สำหรับการส่งออกข้อมูลรายเดือน/รายสัปดาห์
- **การตรวจสอบระยะไกล**: ใช้การสื่อสาร RS485 และการเชื่อมต่อกับ PC
- **การดีบักและการป้องกัน**: มีฟังก์ชันการดีบักที่มีพลัง, สัญญาณเตือนข้อผิดพลาด, และคำอธิบายการแก้ไขปัญหา
- **ฟังก์ชันทามด์**: ฟังก์ชันการทำงานตามกำหนดเวลาและหยุดการทำงาน พร้อมการป้องกันการดับไฟเพื่อเพิ่มความเสถียรของระบบ
- **การตรวจสอบแบบรวมศูนย์**: รองรับโปรโตคอลการสื่อสารสำหรับห้องทดสอบหลายห้อง
การตั้งค่ามาตรฐาน
ฟีเจอร์ด้านความปลอดภัย
- การป้องกันแรงดันสูงเกินและทำให้ร้อนเกินไปสำหรับคอมเพรสเซอร์
- การป้องกันการรั่วไหลของไฟฟ้าและการดิน
- การป้องกันแรงดันสูงเกินและลัดวงจร
- การป้องกันความร้อนสูงเกินสำหรับพัดลมหมุนเวียน
- การป้องกันการแห้งเกินไปสำหรับอุปกรณ์เพิ่มความชื้น
- การป้องกันลำดับเฟสและการป้องกันความล้มเหลวของเฟส
- การป้องกันความดันต่ำสำหรับการจ่ายน้ำทำความเย็น
การสร้าง
- ห้องในทำจากสแตนเลสและเคลือบสีมาตรฐาน TOPECT
- ประตูแบบใบเดียวพร้อมหน้าต่างกระจกชนิดแข็งสำหรับดูตัวอย่างที่อยู่ภายในห้องและมีระบบอุ่นล่วงหน้าเพื่อป้องกันการควบแน่น
- เทปซีลประตูออกแบบมาสำหรับการเก็บรักษาความร้อนและลดการควบแน่น
- ถาดรองน้ำที่อยู่บนประตูเพื่อป้องกันน้ำหยดเมื่อเปิดประตู
คุณสมบัติเพิ่มเติม
- ฟังก์ชันการวินิจฉัยตัวเองสำหรับการระบุและแก้ไขปัญหา
- อุปกรณ์ควบคุมแรงดันระเหย, อุปกรณ์ควบคุมแรงดันระบายลม, และอุปกรณ์ควบคุมแรงดันควบแน่น
- ป้องกันความร้อนสูงเกินสามารถปรับได้และฟังก์ชันการปรับอัตโนมัติสำหรับอุณหภูมิและความชื้น
อุปกรณ์เสริม
การจ่ายน้ำ
- อุปกรณ์จ่ายน้ำบริสุทธิ์อัตโนมัติสำหรับห้องทดสอบอุณหภูมิและความชื้น
การสื่อสารและการตรวจสอบ
- พอร์ตการสื่อสารและซอฟต์แวร์สำหรับการควบคุมระยะไกลและการถ่ายโอนข้อมูล
การควบคุมความชื้น
- เครื่องเป่าอากาศ และความสามารถในการทำงานในสภาวะความชื้นต่ำและความชื้นต่ำสุด (เช่น 5°C/5%RH)
ตัวเลือกการปรับแต่ง
- รูนำขนาดต่าง ๆ (φ50, φ80, φ100, φ160 เป็นต้น)
- เครื่องบันทึกอุณหภูมิสำหรับบันทึกกราฟอุณหภูมิ
- เซ็นเซอร์อุณหภูมิแบบเคลื่อนที่
- รถเข็นแบบปรับแต่งได้ตามความต้องการของผู้ใช้
- อุปกรณ์ที่ไม่เป็นมาตรฐานสามารถตอบสนองความต้องการของผู้ใช้
- ที่รองรับน้ำหนักตัวอย่างพิเศษและแผ่นพื้น
Temperature, Humidity and Vibration Integrated Test Chamber
- Large size observation window
- Unique lever lock
- Power supply control terminal of sample
- Vibration table is available
- Triple independent over-temperature protection
- Controller developed independently by Topect
Model
|
TCTH300-
70W5T5
|
TCTH500-
70W5T5
|
TCTH1000-
70WT5
|
TCTH300-
70W10T5
|
TCTH500-
70W10T5
|
TCTH1000-
70W10T5
|
TCTH300-
70W15T5
|
TCTH500-
70W15T5
|
TCTH1000-
70W15T5
|
Internal Volume(L)
|
300
|
500
|
1000
|
300
|
500
|
1000
|
300
|
500
|
1000
|
Inner Dimension(mm)
|
W
|
700
|
800
|
1000
|
700
|
800
|
1000
|
700
|
800
|
1000
|
H
|
700
|
900
|
1000
|
700
|
900
|
1000
|
700
|
900
|
1000
|
D
|
600
|
700
|
1000
|
600
|
700
|
1000
|
600
|
700
|
1000
|
Temperature Range(℃)
|
(-70~150)℃
|
Humidity Range(%RH)
|
(20~98)%RH(20~85)℃
|
Temperature Fluctuation(℃)
|
±0.5℃
|
Temperature Deviation(℃)
|
±2.0℃
|
Humidity Deviation(%RH)
|
±3.0%RH(>75%RH)±5.0%RH(≤75%RH)
|
Temperature Rising and Cooling Rate(℃/min)
|
5℃/min
|
5℃/min
|
5℃/min
|
10℃/min
|
10℃/min
|
10℃/min
|
15℃/min
|
15℃/min
|
15℃/min
|
Temperature and Humidity
Regulation Mode
|
BTHC Balanced temperature and humidity control
mode(SSR humidity regulation)
|
Operating Environment
|
Temperature: (5~36)℃ Humidity: (30~85)%RH
Pressure:(86~106)kPa
|
材料
Material
材料
|
Inner Chamber
|
Stainless steel sheet SS304
|
Outer Chamber
|
Two-sided galvanized plate, with the surface
treated by electrostatic powder coating
|
Thermal Insulation
|
High temperature glass/rock wool & polyurethane foam
|
Actuator
|
Fan
|
Extended shaft centrifugal fan
|
Refrigerator
|
Low-noise piston type compressor or scroll compressor
|
Heater
|
Imported nickel-chrome
|
Humidifier
|
316 stainless steel humidifier(external steam generator)
|
Controller System
|
Touch Screen & PLC
|
800×480 resolution, mixed output PLC
|
Running Mode
|
Fixed mode, Program mode
|
Setting Mode
|
Simplified Chinese & English, input by touch
|
Program Capacity
|
groups of programs, each consisting of 50 sections
for setting 32000 times of cycles.The program has link function.
|
Setting Range
|
Can be adjusted to ±5.0℃ according to the maximum
range of the equipment, Eg. humidity range (5±100)%RH (humidity equipment)
|
Display Resolution
|
Temperature:0.01℃,humidity:0.1%RH(humidity equipment),time:s
|
Sensor
|
PT100(platinum resistor), Humidity Sensor
|
Control Mode
|
Low-temperature cold balance & anti-integral
saturation PID& auto-tuning
|
Curve Record
|
With automatic data storage function.
User can browse the data by sliding on the screen; screen shot function is available.
|
Additional Function
|
Fault alarm and cause handling prompt function:
Timed startup/stop; power failure protection, user permission function.
|
Communication Function
|
Support RS485,LAN (internet port), GPRS(phone) and other communication
modes, which enable users to conduct remote
monitoring simply.Data acquisition: IBM PC compatible
machine.CPU above PII, memory above 128M, operating system in Simplified Chinese /English.
|
Data Acquisition
|
1.With USB interface, curve data of three months
can be saved, and historical curve and test data can be downloaded.
2.It can be an alternative to the recorder.With built-in extra memory,
3 months of data under the condition that the machine runs for24 hours
continuously can be saved. The sampling time is Imin.It can replace
computer storage.Users can export historical data through USB disk (time is optional) and generate files in the format of CSV.
3.Connect to PC (optional)-Record testing data through
computer monitoring software.It can display the curve.
PC can be used as remote terminal to realize remote monitoring.
|
Water Supply
|
Water Supply Mode
|
Draw water by water pump
|
Water Storage Tank
|
10L/20L/40L Resistivity >500Ω m
|
Circulating Water Flow d(t/h)
|
6
|
6
|
8
|
6
|
8
|
12
|
8
|
10
|
18
|
Power Supply(V)
|
AC voltage 380V±38V Frequency 50Hz±0.5Hz 3-phase
4-wire & earthing protection
|
Maximum Current(A)
|
45
|
50
|
63
|
63
|
65
|
92
|
65
|
68
|
105
|
Power(kW)
|
30
|
32
|
37
|
37
|
40
|
60
|
40
|
40
|
68
|
Weight(kg)
|
850
|
900
|
1050
|
930
|
1000
|
1180
|
1050
|
1150
|
1320
|
Standard Configuration
|
Electric heating observation window, I testing hole of φ50
on each side, 2 sets of sample holders
|
Safety Device
|
Leakage switch, motor, compressor, phase sequence,
over-temperature protection, dry burn protection. etc.
|
Structural Features
|
|
|
●Drawer-type water tank.
●Unique door lock design is convenient to operate and better in sealing performance.
●Large size observation window makes it convenient for operator to observe the test sample inside the chamber.
●Lead holes are available on the two sides of the equipment, convenient for placing the testing apparatus,leads, etc.
●The inner chamber is made by SS304 stainless steel; the external chamber is made by CRCS with electrostatic powder coating.
●Modularized Refrigerator system, waterway system and the electrical control system for safety and ease of maintenance.
●Air is supplied into the chamber from below at the angle of 45.In this way, the internal temperature is distributed evenly and the temperature and humidity can become constant at a much faster speed.The angle of guide vane can be adjusted freely, effectively ensuring the uniformity inside the chamber.

Refrigeration System
● Major parts and accessories from international famous brands.
● Refrigerant R404A and R23 are used in the system with the ozone depletion factor of 0.
● All condensers are installed with filtration device, which ensures long-term reliable operation of the unit
● Intelligent control of refrigeration system optimises power consumption.
● Imported compressor: Tecumsch, Copeland, Bock or Bitzer, low in noise, stable in operation and powerful in performance.
●Before welding, all pipelines are charged with nitrogen to protect the interior of the copper part from oxidation.The weld joints are sprayed with varnish for protection.
● Refrigeration unit adopts modular production, including sub-assembly, part assembly and general assembly; standardized modules are convenient to install, debug and maintain
|
1. **TC**
- Three comprehensive series
2. **T**
- Temperature
3. **(H)**
- With humidity feature
4. **300**
- Internal volume (L)
5. **70**
- Minimum negative temperature (℃)
6. **W**
- W: Water cooling type
- A: Air cooling type
7. **5**
- Temperature rising and cooling rate (℃)
8. **T5
- Vibration table thrust
Here’s a structured summary of the **Control System** and **Standard Configuration and Optional Accessories** for the Topect temperature and humidity test chambers:
Control System
Controller Type
- Topect touch-type temperature and humidity controller.
- Composed of a touch screen, PLC, temperature module, and humidity module.
Features
- **Touch Screen**: 7" TFT true-color display with 65536 colors, 800×480 resolution, visual editing software, and PLC logic programming.
- **I/O Ports**: Extendable input and output ports for customization.
- **Data Export**: USB interface for exporting monthly/weekly data.
- **Remote Monitoring**: Enabled through RS485 communication and PC connection.
- **Debugging and Protection**: Powerful debugging functions, fault alarms, and troubleshooting descriptions.
- **Timed Functions**: Timed running and stop functions, along with power failure protection to enhance system stability.
- **Centralized Monitoring**: Supports communication protocols for multiple test chambers.
Standard Configuration
Safety Features
- Overpressure and overheating protection for the compressor.
- Earthing and current leakage protection.
- Overload and short circuit protection.
- Overheating protection for the circulating fan.
- Anti-dry burn protection for the humidifier.
- Phase sequence and phase failure protection.
- Low pressure protection for cooling water supply.
Construction
- Stainless steel inner chamber with external coating in Topect standard color.
- Single leaf door with toughened glass inspection window and pre-heating system to prevent condensation.
- Door seal strip designed for thermal insulation and condensation reduction.
- Drip tray on the door to prevent water dripping when opened.
Additional Features
- Self-diagnosis function for fault identification and resolution.
- Evaporation, exhaust, and condensation pressure regulating devices.
- Adjustable over-temperature protection and auto-tuning function for temperature and humidity.
Optional Accessories
Water Supply
- Automatic pure water supply device for the temperature-humidity test chamber.
Communication & Monitoring
- Communication port and software for remote control and data transmission.
Humidity Control
- Air dryer and capabilities for low and super low humidity conditions (e.g., 5°C/5%RH).
Customization Options
- Lead holes of various specifications (φ50, φ80, φ100, φ160, etc.).
- Temperature recorder for recording temperature curves.
- Movable temperature sensor.
- Customized sample carts and non-standard equipment to meet specific user demands.
- Special load-bearing sample holders and bottom plates.
This summary encapsulates the essential features and configurations of the Topect temperature and humidity test chambers. If you need further details on any specific aspect, feel free to ask!
