AUTOMATIC KEY BOARD LOAD & DISPLACEMENT TEST MACHINE
ทดสอบแป้นพิมพ์,เครื่องทดสอบแป้น,เครื่องทดสอบแป้นพิมพ์,Board,automatic key, automatic key board
AUTOMATIC KEY BOARD
LOAD & DISPLACEMENT TEST MACHINE
Usage :
- This machine is suitable for various kinds of button for the compression, tension test, is widely used in various type of rubber buttons, metal buttons, shrapnel, computer keyboard mobile phone, MP3, Bluetooth, hansfree Headset, CD, electronic dictionary, telephone, remote control and other key made under the pressure, rebound test, but also can be used as a key fatigue life test.
Characteristics
- Automatic test method
Testing personnel just when the time (batch) test conditions of input and storage can be automatically for compression, tensile test. test is
- Wide applicabillity
Such as Key product testing, can be used as a key IQO incoming inspection can also be used as a product key life test, completed automatically storage curve and test data.
- High density
Load resolution of : 0.01gf, displacement resolution of : 0.001mm
- Unit switch
Load : N, GF, KGF, Lb convertible ; displacement : mm, CM convertible
- Storage
The test data (curve, data) stored in the computer hard disk (each data can be stored, unlimited)
- Humanized design, simple operation
All the test conditions were set by the computer screen : test load, displacement, frequency, speed, wating time..
- Report design of human nature
Report the rise of the content can be modified at any time (in English can), automatic report generation, do not need to input, data report, curve Report
- Automatic determination and analysis of test result
Input compression, tensile load on the lower limit value, specifications, test result automatic judgment of Passed or Fail and analysis
- Software-have developed with independent intellectual property rights
Indeppendent development of "automatic press key {load-displace test machine", WindowsXP operation system is developed based on, humanized design, easy to operate, with a 32 bit 66MHz Arm processing chip industry, is better than 16
- DSP processing technology
- Analysis of the rate of-Click
After the test, can be saved automatically maximum compression force, maximum, minimum springback stress force and automatic analysis of Click rate
The machine specifications
- The test load type 5kgf (standard) (100Kg)
- Minimum display load 0.01gf
- The maximum test trip 100mm
- Minimum display stroke 0.01mm or 0.001mm
- To test the speed range 0-100mm/min
- Transmission mechanism of ball screw
- The drive motor of Japan Panasonic servo motor
- Machine dimensions W300xD270xH500mm
- The weight of 31kg
- Power AC220V 50Hz
Six introduction of softwaer
- All the test conditions are input by computer and automatic storage load measuring range, distance measurement range, determination of total number, measuring speed, determine the direction, to suspend the retention time, initial position detection time, etc.;
- Display the real-time data compression and tension charge can also dispaly : (gf-mm).
- The test data of visible print the required set, print : lifetime decay curves {load-displacement curve + data, test data, the report can be calculated automatically : the maximum value, minimum value, average value, standard difference, difference.
