Digital Surface Volume Resistivity Meter
เครื่องทดสอบความเรียบ Model MR43 (TRONOVO)
MR43 เป็นเครื่องทดสอบความต้านทานพื้นผิวที่มีความเชื่อถือได้ในราคาที่เอื้อมถึง สามารถตรวจสอบความต้านทานพื้นผิวและความต้านทานของกราวด์ การกดปุ่มทดสอบจะทำให้เกิดแรงดันไฟฟ้าทดสอบอัตโนมัติที่ 10V หรือ 100V และเครื่องมือสามารถใช้ในการประเมินประสิทธิภาพบนพื้นผิวต่าง ๆ เช่น พื้น, เก้าอี้, รถเข็น, เสื้อผ้า และวัสดุบรรจุภัณฑ์ การวัดสามารถทำได้โดยใช้อิเล็กโทรดที่สร้างขึ้นในตัวที่ด้านล่างของเครื่อง หรือใช้ร่วมกับโพรบอื่น ๆ ได้
ดาวน์โหลด


• แผงจอภาพดิจิทัล ความแม่นยำสูง ค่าความต้านทานสามารถมองเห็นได้ชัดเจน
• การวัดค่าอัตโนมัติเต็มรูปแบบ ช่วงความต้านทานและแรงดันทดสอบจะถูกเลือกโดยอัตโนมัติ
• สอดคล้องกับ ANSI/ESD S20.20 และ IEC61340-5-1 เป็นไปตามข้อกำหนดทั่วไปสำหรับการตรวจจับไฟฟ้าสถิตย์
• การวัดอุณหภูมิและความชื้น การวัดค่าความต้านทานมีความสำคัญ
• แบตเตอรี่ลิเธียมอายุการใช้งานยาวนาน ไม่จำเป็นต้องถอดแบตเตอรี่
• การออกแบบอินเทอร์เฟซที่เป็นนวัตกรรม สายทดสอบที่แข็งแกร่งและมีประสิทธิภาพสูง
• โพรบที่มีมากมาย (เลือกได้) โพรบค่าความต้านทานขนานในตัวสำหรับการใช้งานร่วมกับน้ำหนัก 5 ปอนด์, โพรบแบบสองจุด หรือโพรบวงแหวนแบบเข้ารูป
Model |
MR43 |
Range |
1.0x10³ ~ 1.0 x10¹² |
Accuracy |
±10%, ±20% (≤1.0x10⁴ and ≥1.0x10¹¹) |
Displayed |
LED |
Test Voltage |
10V or 100V ±5% (Auto) |
Test Mode |
CONT |
Battery |
2×3.7V Li-ion battery |
Standby |
480 hours standby or about 8000 measures |
Alarm |
Voltage less than 30% of total charge |
Interface |
TYPE C |
Environment |
Temp: 0 to 50°C Humidity: 35 to 80%RH |
Weight |
285g |
Warranty |
One-year limited warranty |

The MR43 is an affordable and reliable surface resistance tester for checking surface resistance and ground resistance. Pressing the test button automatically generates a test voltage of 10V or 100V, and the instrument can be used for performance evaluation tests on different work surfaces, floors, chairs, carts, clothing, and packaging materials. Measurements can be made using the built-in measuring electrode on the bottom of the instrument, or in combination with other probes.
- • Digital display, high precision The resistance values are clearly visible
- • Fully automated measurements The resistance range and test voltage are automatically selected for you
- • Complies ANSI/ESD S20.20 and IEC61340-5-1 Meets the general specifications for anti-static detection
- • Temperature and humidity measurement Resistance measurements are important
- • Long-lasting lithium battery There is no need to remove the battery
- • Innovative interface design Rugged, high-performance test leads
- • Abundant probes (optional) Built-in parallel resistivity probe for use with 5lb weight, two-point probe, or concentric ring probe


การวัดความต้านทานของอิเล็กโทรด
วิธีการอิเล็กโทรดขนานตรงตามข้อกำหนดของมาตรฐาน ASTM-D-257 และสามารถใช้เพื่อวัดความต้านทานผิวของวัสดุแบนได้อย่างรวดเร็ว
Electrode/resistivity measurement
The parallel electrode method meets the requirements of the ASTM-D-2S7 standard and can be used to quickly measure the surface resistance of flat materials.

การทดสอบความต้านทานของวัสดุที่ไม่สม่ำเสมอ
ตามข้อกำหนด SAE J645 อิเล็กโทรดแบบหนีบจะถูกหนีบที่ทั้งสองด้านของวัสดุที่ต้องการวัด และอิเล็กโทรดแบบหนีบจะถูกแขวนเพื่อวัดค่าความต้านทาน
Irregular material resistance test
SAEJ645 specification, the clamp electrode is clamped at both ends of the material to be measured, and the clamp electrode is suspended to measure the resistance value.

การทดสอบความต้านทานของถุงมือและปลอกนิ้ว
ตามข้อกำหนด ANSI/ESD S11.1 สวมถุงมือหรือปลอกนิ้วและสายรัดข้อมือป้องกันไฟฟ้าสถิต แตะที่จุดสัมผัสด้านล่างของอิเล็กโทรดด้วยนิ้วมือ ยกอิเล็กโทรดทั้งหมดขึ้น และทดสอบค่าความต้านทาน
Resistance test of gloves and finger cuffs
ANSI/ESD SPlS.l specification, wear gloves or finger gloves and anti-static wrist straps, touch the lower contact of the electrode with your fingers, lift the entire electrode, and test the resistance value.

การทดสอบร่างกายมนุษย์ + รองเท้า + พื้น
ตามข้อกำหนด ANSI/ESD STM97.1 อิเล็กโทรดที่มีน้ำหนัก 1 กิโลกรัมจะถูกวางบนพื้นป้องกันไฟฟ้าสถิต และอิเล็กโทรดที่จับด้วยมือจะวัดความต้านทานการกราวด์ของร่างกายมนุษย์
Human body+ shoes + floor test
ANSI/ESD STM97.l specification, l weighted electrode is placed on the anti-static floor, and the hand-held grip electrode measures the grounding resistance of the human body.