Product Features：
●Uses piezoelectric acceleration transducer to convert vibration signal.
●In accordance with ISO 2954,GB13823.3, used for periodic measurements, to detect out-of-balance,misalignment and other mechanical faults in rotating machines.
●Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
●3 accelerators in 1 sensor for 3-axis vibration measurement.
●3 same parameters in one display for 3 dimensional measurement or 1 dimensional measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
●Bearing condition monitoring function.
●LCD digital display with back light.
●Lightweight and easy to use.
●Wide frequency range (10Hz.~10kHz.)
●Automatic power shut off to conserve power.
●AC output socket for headphones and recording.
●Optional headphones for use as electronic stethoscope.
●Optional software and cable for RS232C.
Product Application：
●Used for maintenance of mechanical equipment, such as fault diagnosis of bearings and gearboxes
●By plotting trend charts based on vibration parameters, it predicts fault times in advance, maximizes equipment utilization, and facilitates production by ordering spare parts and formulating maintenance plans simultaneously
●Monitor the vibration conditions of buildings, bridges, and other structures to ensure their structural safety and stability
Technical Parameters：
Model
MS-6380
Vibration Sensor
3-Axis Piezoelectric accelerometer
Display
4 digit LCD backlit
Axial Vibration
any one axis of X , Y, Z or 3 axes of XYZ
Accuracy
±(5%n+2) digits
Measurement Range
Displacement
0.001-4.000mm Equivalent Peak-Peak; 0.04-160.0 mil
Acceleration
0.1-400.0 m/s Equivalent Peak; 0.3-1312 ft/s; 0.0-40g
Velocity
0.01-400.0 mm/s True RMS; 0.04-16.00 inch/s
Frequency Range
Displacement
10Hz. ~ 1kHz.
Acceleration
10Hz. ~ 10kHz
Velocity
10Hz. ~1kHz.
Analogue Output
AC output 0~2.0V peak full scale(load resistance: above 10k)
With Max. value hold and low battery indication
Metric/ Imperial conversion
PC interface
RS232C ( Cable and software is not included)
Power off
Manual off at any time or auto power off is enabled by user
เครื่องทดสอบแรงสั่นสะเทือน Vibration Analyzer ADL-MS32 
