เครื่องทดสอบแรงดึงแรงกด ชนิดพกพา Digital Force Gauge Model Series-5i
จำหน่ายสินค้าอุตสาหกรรมครบวงจร
สามารถติดต่อสอบถามได้ที่ 02-9744354-6 สายด่วน 088-7777277
ขอใบเสนอราคาได้ที่ Email : salesitokin@gmail.com
Line : @itokin2000.com
คุณสมบัติ
- เซ็นเซอร์แรงและแรงบิดเปลี่ยนแทนกันได้ผ่านเทคโนโลยี Plug & Test ™
- การป้องกันรหัสผ่านสำหรับแต่ละปุ่มและการสอบเทียบ
- เอาต์พุต USB, RS-232, Mitutoyo และอะนาล็อก
- หน่วยความจำข้อมูล 1,000 จุดพร้อมสถิติ (ขั้นต่ำ, สูงสุด, ค่าเฉลี่ย, ค่าเบี่ยงเบนมาตรฐาน) และเอาต์พุต
- จุดตั้งโปรแกรมที่มีตัวบ่งชี้ผ่าน / ล้มเหลวเสียงและภาพ
- โหมดเฉลี่ย - คำนวณค่าเฉลี่ยของการอ่านเมื่อเวลาผ่านไป
- เอาต์พุตข้อมูลอัตโนมัติผ่าน USB / RS-232
- เสียงเตือนที่กำหนดค่าได้และเสียงปุ่มกด
- การป้องกันรหัสผ่านของเซ็นเซอร์เพื่อป้องกันการใช้เซ็นเซอร์ที่ไม่ได้รับอนุญาต
- อัตราการสุ่มตัวอย่าง 7,000 Hz ความเร็วสูง
- จอแสดงผลกราฟิกเรืองแสงขนาดใหญ่
- กราฟแท่งโหลดแบบสดพร้อมตัวระบุตำแหน่ง
- ค่าสูงสุดและค่าที่อ่านได้จะปรากฏขึ้นเสมอ
- โหมดทริกเกอร์ภายนอก - สำหรับการทดสอบการสัมผัสสวิตช์หรือหยุดการอัพเดตหน้าจอจากระยะไกล
- เลือกหน่วยวัดได้ 5 หน่วย
- รวมถึง 10 pt NIST ใบรับรองการสอบเทียบที่สอบกลับได้
ข้อมูลจำเพาะ
ความถูกต้อง |
± 0.1% ของเซ็นเซอร์เต็มสเกล |
อัตราการสุ่มตัวอย่าง |
7,000 Hz |
อำนาจ |
AC หรือแบตเตอรี่แบบชาร์จไฟได้ ไฟแสดงสถานะแบตเตอรี่ต่ำหลายระดับจะปรากฏขึ้นมาตรวัดจะปิดโดยอัตโนมัติเมื่อพลังงานต่ำเกินไป |
อายุแบตเตอรี่ |
เปิดแบ็คไลท์:ใช้งานต่อเนื่องสูงสุด 7 ชั่วโมง
ปิดแบ็คไลท์:ใช้งานต่อเนื่องสูงสุด 24 ชั่วโมง |
เอาท์พุท |
USB / RS-232:กำหนดค่าได้มากถึง 115,200 baud รวมถึงการควบคุมมาตรวัดภาษา 2 สำหรับการควบคุมคอมพิวเตอร์เต็มรูปแบบ
Mitutoyo (Digimatic): Serial BCD เหมาะสำหรับทุกอุปกรณ์ที่รองรับ Mitutoyo SPC
อนาล็อก: |
การตั้งค่าที่กำหนด |
ตัวกรองดิจิตอล, เอาต์พุต, เอาต์พุตอัตโนมัติ (ผ่าน USB / RS-232), ปิดเครื่องอัตโนมัติ, การตั้งค่าเริ่มต้น, โหมดเฉลี่ย, ทริกเกอร์ภายนอก, รหัสผ่าน, เสียงเรียกเข้า, เสียงเตือน, แบ็คไลท์, การสอบเทียบ |
ปลอดภัยเกินพิกัด |
150% ของสเกลเต็ม (หน้าจอแสดง "OVER" ที่ 110% และสูงกว่า) |
น้ำหนัก |
น้ำหนัก: 0.7 ปอนด์ (0.3 กก.) |
การประกัน |
3 ปี |
Advanced Force/Torque Indicator

The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see below). With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensor's smart connector, not the indicator, allowing for true interchangeability. Sensor password protection prevents use of an unauthorized sensor. In addition, all sensors are fully compatible with the more basic 3i force / torque indicator.
The 5i shares its menu structure and most specifications with Series 5 digital force gauges. The sampling rate is a blazing fast 7,000 Hz, producing accurate results even for quick-action tests. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the indicator's many features and configurable parameters. Data can be transferred to a PC or data collectors via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
On-board data memory for up to 1,000 readings is included, as are statistical calculations with output to a PC. Integrated set points with indicators and outputs are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. An analog load bar is shown on the display for graphical representation of applied force or torque.
The 5i's averaging mode addresses the need to record the average load over time, while external trigger mode makes switch activation testing simple and accurate.
The 5i includes MESURTM Lite data acquisition software. MESURTM Lite tabulates continuous or single point data. Data saved in the indicator's memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.
Features
- Interchangeable force and torque sensors through Plug & Test™ technology
- Password protection for individual keys and calibration
- USB, RS-232, Mitutoyo, and analog outputs
- 1,000-point data memory with statistics (min, max, mean, standard deviation) and outputs
- Programmable set points with pass/fail audible and visual indicators
- Averaging mode - calculates average readings over time
- Automatic data output via USB/RS-232
- Configurable audio alarms and key tones
- Sensor password protection, for preventing use of an unauthorized sensor
- High-speed 7,000 Hz sampling rate
- Large backlit graphic display
- Live load bar graph with set point markers
- Peak readings and set points always displayed
- External trigger mode - for switch contact testing or remotely stopping display update
- 5 selectable units of measurement
- Includes 10 pt NIST Traceable Calibration Certificate
Specifications
Accuracy |
±0.1% of full scale + sensor |
Sampling rate |
7,000 Hz |
Power |
AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. |
Battery Life |
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use |
Outputs |
USB / RS-232: Configurable up to 115,200 baud. Includes Gauge Control Language 2 for full computer control.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices.
Analog: |
Configurable Settings |
Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibration |
Safe overload |
150% of full scale (display shows "OVER" at 110% and above) |
Weight |
Weight: 0.7 lbs (0.3 kg) |
Warranty |
3 years |