เครื่องทดสอบแรงดึง Universal testing Machine model QC-513M1F (Come-Tech)

เครื่องทดสอบแรงดึงแรงกด รุ่นนี้ สปีดเริ่มต้นที่ 0.2 ถึง 1000 มิลลิเมตรต่อนาทีมาพร้อมกับมอเตอร์แบบ ServoMotor และ Stroke 400mm (ไม่รวมปากจับ) หน่วยวัดที่ใช้งานForce: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)
Stress: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Length:m, cm, mm, ft, in ใช้งานง่าย มาพร้อมซอฟแวร์ที่ทันสมัยพร้อมออก Report ได้อย่างสมบูรณ์

สามารถติดต่อสอบถามได้ที่ 02-9744354-6 สายด่วน 088-7777277
ขอใบเสนอราคาได้ที่ Email : salesitokin@gmail.com
Line : @itokin2000.com

Specification

Max. Capacity	5kN
Cantilever distance	70 mm
Test stroke(w/o grip)	400 mm
Speed range	0.2~1000 mm/min
Units	Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Stress: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg Length:m, cm, mm, ft, in
Force Resolution	31 bits
Force Precision	1/100000
Stroke resolution	0.0001 mm
PC-Port	RJ45(TCP/IP)
Data sampling rate	Max. 400Hz
Motor type	Servo Motor
Test Methods	Tensile, Compression, 3p bend, 4p bend L/2, 4p bend L/3, Creap, Spring Test ( Compress), Spring Test ( Tensile), 180˚ peel
Analysis Data	Over 200
Real Time Data	Force Display/ Displacement Display/ Time Display/ Stress Display/ Strain Display ( Selectable)
Test End	Automatic detection of breaking, and also automatic return can be select.
Protection	1. Over load protection 2. Over stroke protection 3. Over time protection 4. Up/Down limit 5. Emergency Stop 6. Anti-collision function( At 1000mm/min speed, load cell capacity that is over 50kg will not be overload, but load cell brand should be appointed by Cometech)
Feature	1. Automatic reading of load cell feature information. ( Load cell can be calibrated without installed on machine) 2. Automatic reading of displacement sensor feature information. ( Displacement sensor can be calibrated without installed on machine) 3.External analog input (Reading of voltage or current) 4. Test condition setting module
Power Supply	Single phase 200V -240 V, 5A
Dimension of Machine	50 X 53 X 100 cm
Weight of Machine	65 kgf

Display
1. Adopted with 7- inch of TFT Color touch screen
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7. Various machine shutdown conditions setting (force, displacement, time, elongation).
8. Can be restored to the original factory state.
9. Unit selection can be Metric unit, Imperial units.
10. Over-travel, overload protection and overtime machine stop
11. Can store up to 50 data, USB storage data function.
12. Support multiple sets of signal sources.

Software

1.It is operated by keyboard and mouse; grip position is controllable by up/down button.
2.Adjustment of X-Y axis on the graph: curve’s point marking, interval, slope, etc.
3.Different test patterns available: Hold tensile, special setting of grip movement.
4.TCP/ IP interface ( two-way transmission). Machine can be controlled by PC.
5.Test setting can be saved as module to reduce mistake and errors.
6.Available in Chinese, English, Japanese, Korean, Spanish, Polish.
7.Multiple test data can be shown simultaneously on the software.
8.Tensile, compression, bending, peeling, spring tests available.
9.The software can show data, graphs or both at the same time.
10.Compatible with Window 7/8/10
11.Sampling rate up to 400Hz
12.The software supports various I/O signals
13.Unit can be chosen between metric or imperial
14.The data table can be modified based on user’s preference
15.Data can be renamed and formula can be created
16.Data processing: store, call, list, statistical comparison, etc.
17.Protection from excessive test stroke, capacity and time
18.Sample specification can be saved as module for quick use.
19.Upper and lower limits can be selected to access key data.

Report

Accessories

QC-551 Long Extensometer

QC-551 Long extensometer is suitable for higher than 20% elongation of rubber, plastic, PE, fabric, webbing of material which are high elongation measurement accessories. The specimen usually made dumbbell-shape. The extensometer can link with Cometech machine and auto-detect the deformation of the test piece during the test.

QC-557 Short Extensometer

QC-557 Short extensometer can measure metal, hard plastic of less than 100% elongation of material deformation. During test, it can measure complete test deform rate and do not need to dismantle it when during the test. When the specimen gauge length is longer or elongation rate is bigger, customized longer extensometer is also available