Feature
- Autocratically reading load cell and displacement sensor feaure information
- Digital speed setting
- Equipped with 7" TFT color touch screen, able to support real-time test curce diagram display
- Automaticall return
- Force overload protection
- Support stand alone operation or choose the optinal software to test and analysis
- Test condition modularize
- Able to add the optional printer
Specification
Model
S
M
L
Size
(50x50x105 cm;65kgf)
(50x50x145 cm;80kgf)
(50x50x175 cm;100kgf)
Test Stroke (without Grips)
400 mm
800 mm
1100 mm
Max. Capacity
5 kN
2 kN
Force Resolution
23 bits
Force Precision
1/10,000
Stroke Resolution
0.0125 mm
Speed Range
8~550 mm/min (Digital type Setting)
PC-Port
RJ45 (TCP/IP)
Data Sampling Rate
Max. 1200 Hz
Motor Type
DC Motor
Machine Rigidity
4.1 kN/mm
Hardware Safety Protection
Upper/Lower Limition, emergency stop button
Power
Single Phase 100~240 VAC 5A
Application
ASTM D790, ISO 178 Bending test
ASTM D882 Film Tensile Test
ASTM D638 Plastic Tensile Test
Display
- Adopted with 7- inch of TFT Color touch screen
- Chinese, English, Japanese, Three different languages can be selected.
- Data Display: Force, Stress, Torque, Displacement, Time
- Able to set hardware, test, units, information,protection,curce graph setting
- Support different units switching including metric and Imperial units
- Display supports to store up to 50 data result
- Able to save the results by USB
Extensometer
Software
Software
1.It is operated by keyboard and mouse; grip position is controllable by up/down button.
2.Adjustment of X-Y axis on the graph: curve’s point marking, interval, slope, etc.
3.Different test patterns available: Hold tensile, special setting of grip movement.
4.TCP/ IP interface ( two-way transmission). Machine can be controlled by PC.
5.Test setting can be saved as module to reduce mistake and errors.
6.Available in Chinese, English, Japanese, Korean, Spanish, Polish.
7.Multiple test data can be shown simultaneously on the software.
8.Tensile, compression, bending, peeling, spring tests available.
9.The software can show data, graphs or both at the same time.
10.Compatible with Window 7/8/10
11.Sampling rate up to 400Hz
12.The software supports various I/O signals
13.Unit can be chosen between metric or imperial
14.The data table can be modified based on user’s preference
15.Data can be renamed and formula can be created
16.Data processing: store, call, list, statistical comparison, etc.
17.Protection from excessive test stroke, capacity and time
18.Sample specification can be saved as module for quick use.
19.Upper and lower limits can be selected to access key data.