เครื่องทดสอบแรงดึง Universal testing Machine model QC-506M1F (Come-Tech)

QC-506M1F
Universal Materials Testing Machines
Description
This double-columned bench type model has a practical test space and stroke, not only suitable for large specimens but also for environmental testing. The machine is equipped with servo motor and ball screw with maximum capacity 20KN. Test stroke varies from the dimension of sample; with different sorts of grips, diverse tests are available.

This model is compatible with Windows 7/8/10. It can perform tensile compression, bending, peeling, hold tensile (compression) tests, and so on. The software is user-friendly in different languages.Units can be chosen between metric or imperial; real-time graphs show a complete analysis of the test; data can be saved as test report for further evaluation. This machine can be operated in stand-alone mode for a quick access to test data.

Conform to Standards
ISO 7500-1/ASTM E4/ASTM D-79/DIN 5122/JIS B7721/JIS B7733/BS EN 1002-2/BS 1610/GB/T 228

Industry
Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electronics, Packaging, Medical, Architecture

Application
ASTM D790, ISO 178　 Bending test
ASTM D882　 Film Tensile Test
ASTM D638　 Plastic Tensile Test

Specification

Model	QC-506M1F	QC-506M1F (Extended)
Maximum Capacity	20 kN
Units	Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Stress: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force resolution	31 bits
Force Precision	1/100,000
Test Stroke (With Out Grip)	800 mm	1200 mm
Stroke Resolution	0.0001 mm
Space Between columns	425 mm (500mm),680,800mm Optional)
Rigidity	2200 kgf/mm
Speed Range	0.2-830 mm/min (adjustable by software)
PC-Port	RJ45(TCP/IP) Software Optinal)
Sampling Rate	400 Hz (Max)
Motor Type	Servo Motor
Hardware safety Protection	Upper limit,lower limit, emergency stop button
Feature	Automatic Reading of load cell' s information Automatic Reading of displacement sensor's information Esternal analog input (Voltage or current) Protection from overload
Power Supply	Single phase 200-240 VAC,5A
Dimension	91 x 58 x 148 cm	95 x 58 x 190 cm
Weight	145 kg	170 kg

Accessories

Display
1. Adopted with 7- inch of TFT Color touch screen
2. Chinese, English, Japanese, Three different languages can be selected.
3. Data Display: Force, Stress, Torque, Displacement, Time
4. Test setting, can set test speed, test direction, automatic position return, breaking point machine stop.
5. Data analysis, can read the maximum force, internal force, breaking point force and so on.
6. Can be stand-alone calibration.
7. Various machine shutdown conditions setting (force, displacement, time, elongation).
8. Can be restored to the original factory state.
9. Unit selection can be Metric unit, Imperial units.
10. Over-travel, overload protection and overtime machine stop
11. Can store up to 50 data, USB storage data function.
12. Support multiple sets of signal sources.

Software

1.It is operated by keyboard and mouse; grip position is controllable by up/down button.
2.Adjustment of X-Y axis on the graph: curve’s point marking, interval, slope, etc.
3.Different test patterns available: Hold tensile, special setting of grip movement.
4.TCP/ IP interface ( two-way transmission). Machine can be controlled by PC.
5.Test setting can be saved as module to reduce mistake and errors.
6.Available in Chinese, English, Japanese, Korean, Spanish, Polish.
7.Multiple test data can be shown simultaneously on the software.
8.Tensile, compression, bending, peeling, spring tests available.
9.The software can show data, graphs or both at the same time.
10.Compatible with Window 7/8/10
11.Sampling rate up to 400Hz
12.The software supports various I/O signals
13.Unit can be chosen between metric or imperial
14.The data table can be modified based on user’s preference
15.Data can be renamed and formula can be created
16.Data processing: store, call, list, statistical comparison, etc.
17.Protection from excessive test stroke, capacity and time
18.Sample specification can be saved as module for quick use.
19.Upper and lower limits can be selected to access key data.

Extensometer

QC-551 Long extensometer is suitable for higher than 20% elongation of rubber, plastic, PE, fabric, webbing of material which are high elongation measurement accessories. The specimen usually made dumbbell-shape. The extensometer can link with Cometech machine and auto-detect the deformation of the test piece during the test.

QC-557 Short extensometer can measure metal, hard plastic of less than 100% elongation of material deformation. During test, it can measure complete test deform rate and do not need to dismantle it when during the test. When the specimen gauge length is longer or elongation rate is bigger, customized longer extensometer is also available.