เครื่องทดสอบแรงดึงแรงกด ชนิดพกพา Digital Force Gauge Model FGPX-Series (SHIMPO)

FGPX Series
High-performance digital force gauges with enhanced communication functions
Vast improvements in the data management function compared with the pre-existing FGP Series. FGPX Series digital force gauges can be used for a wider variety of tests with these additional functions: compatibility with Digimatic signals; an LED indicator function, which indicates the results (HI, LO, OK) using LEDs; a hold function, which holds the indicated value using an external signal; and a zeroing function, which enables a tare deduction setting using an external signal.
Features
LED indication of results
The LED indicator (HI, LO, or OK) allows the results to be checked immediately.
Digimatic signals
The force gauge can be connected to a Mitutoyo Digimatic Printer.
External signals
A hold function for holding the indicated value and a zeroing function for tare deduction settings have been added.
USB communication
The data can be transferred to a personal computer through a USB port. Specialized software TORIEMON enables easy data transfer.
Measuring range
of the series |
±2.000 N, ±5.000 N, ±10.00 N,
±20.00 N, ±50.00 N, ±100.0 N,
±200.0 N, ±500.0 N, ±1000 N |
型式 |
FGPXシリーズ |
FGPX-02 |
FGPX-05 |
FGPX-1 |
FGPX-2 |
FGPX-5 |
FGPX-10 |
FGPX-20 |
FGPX-50 |
FGPX-100 |
定格容量(R.C.) |
±2.000N |
±5.000N |
±10.000N |
±20.00N |
±50.00N |
±100.0N |
±200.0N |
±500.0N |
±1000N |
(±200.0g) |
(±500.0g) |
(±1000g) |
(±2.000kg) |
(±5.000kg) |
(±10.00kg) |
(±20.00kg) |
(±50.00kg) |
(±100.0kg) |
表示可能範囲 |
±2.000N |
±5.000N |
±10.000N |
±20.00N |
±50.00N |
±100.0N |
±200.0N |
±500.0N |
±1000N |
(±200.0g) |
(±500.0g) |
(±1000g) |
(±2.000kg) |
(±5.000kg) |
(±10.00kg) |
(±20.00kg) |
(±50.00kg) |
(±100.0kg) |
表示分解能 |
0.001N/o.1g |
0.01N/1g |
0.01N/0.001kg |
0.1N/0.01kg |
1N/0.1kg |
単位 |
N、kg単に切換(逆さ表示可能) |
計測方式 |
通常計測、プラスピーク計測、マイナスピーク計測 |
表示周期 |
1回/秒、2回/秒、3回/秒、5回/秒、10回/秒、20回/秒 |
サンプリング周期 |
1000回/秒 |
精度 |
±0.2%R.C.及び ±1/2デジット(23℃にて) |
温度影響 |
ゲイン:±0.01%LOAD/℃、ゼロ:±0.01%/R.C./℃
(ゼロ点ドリフトはトラッキング機能にてキャンセル可能) |
表示器 |
LCD符号付き4桁表示(文字高さ 12mm)
判定LED(Hi_NG、OK、Lo_NG) 3個 |
過負荷耐量 |
200%R.C. |
150%R.C. |
コンパレータ機能 |
Hi_NG、OK、Lo_NGを判定、判定LEDと出力信号にて出力 |
通信 |
USB |
あり(専用通信ソフトによりPCとの通信が可能。接続ケーブルは標準付属品) |
RS-232C |
あり(専用通信コマンドによりPCとの通信が可能。接続ケーブルはオプション品) |
デジマチック |
ミツトヨデジマチックプリンタDP-1VRに接続可能 |
アナログ |
±1V(±表示可能範囲に対して出力)、精度±50mV、12bit D/Aコンバータ方式
出力更新 1000回/秒 ゼロ設定可能、負荷抵抗10kΩ以上 |
出力 |
オーバーロード |
PUSH、PULL オープンコレクタ出力(最大DC30V/5mA) |
コンパレータ |
HI、OK、LO オープンコレクタ出力(最大DC30V/5mA) |
入力信号 |
ZERO(外部ゼロ設定)、HOLD(外部ホールド) |
電源 |
ACアダプタ(DC9V/200mA)又は 内蔵ニッケル水素電池(充電式)
充電中計測可能 電池動作可能時間:満充電後約8時間
充電時間:最大16時間(満充電になると自動的に終了) |
オートパワーオフ機能 |
10分(ACアダプタ接続時は連続使用可能)、無効の設定も可能 |
メモリ機能 |
連続メモリ1000件/単独メモリ100件/標準メモリ50件
(3種類のメモリモード切換可能)
統計機能あり(最大、最小、ピーク、平均、標準偏差) |
使用温度範囲 |
0~40℃(ただし結露の無いこと) |
使用湿度範囲 |
35~85%RH(ただし結露のないこと) |
外形寸法 |
幅75×厚38×長141mm |
幅75×厚38×長147mm |
長のみ149mm |
質量 |
約450g |
約500g |
付属品 |
計測アダプタ(6種類)、ハンガー、ACアダプタ、キャリングケース、専用USBケーブル |
通信ソフト |
専用通信ソフト(USB対応) ホームページより無料ダウンロード |