
สแตนสำหรับยึดเครื่องทดสอบแรงดึงแรงกด ชนิดพกพา
Automatic Test Stand
ดาวน์โหลด

Model FGS-VC (SHIMPO)
สอบถามสินค้าได้ที่ 02-9744354-6 สายด่วน 088-7777277
Line : @itokin2000.com
Email : salesitokin@gmail.com

FGS-VC Series
Motorized Test Stands for Force Gauges (Vertical Type)
By changing digital force gauges (push-pull gauges), loads ranging from 2 N to 2,500 N can be measured with this force gauge stand. The USB interface and specialized FGT-VC add-in software, which is available free of charge, allow the stand carriage moving distance and load data to be easily transferred to a computer and displayed as a graph.
Output |
USB |
Load capacity |
1000 N (100 kg), 2500 N (kg) |
Connectivity |
Personal Computers |
Supportable force gauges |
FGP Series, FGPX Series, FGPX-H Series |
Features
A wider range of loads
Loads ranging from 2 to 2,500 N (0.2-250 kg) can be measured. Various types of digital force gauges can be mounted.
Note: Digital force gauges are sold separately.
・Longer stroke
The mounted force gauge can be moved by up to 400 mm to perform various types of tests.
・Wider speed range
The wide travel speed range (10-400 mm/min) allows the force gauge to respond to various test conditions.

USB connection
Distance and loads are displayed as graphs
Specialized FGT-VC software enables measurement data to be easily transferred to a personal computer. The stand carriage moving distance and the force gauge load data can be simultaneously transferred.
Easy to use
・Uses an LCD on the operation panel
Key switch layout for easy operation
・For switching operation modes
・For setting travel speed
・For displaying distance and travel speed

* The FGT-VC data transfer software specially prepared for the FGS-VC digital force gauge stands is available for download. Click on the Software Download link below to move to the download page.


FGS-VC Series VERTICAL TYPE
形式 |
FGS-100VC |
FGS-250VC |
計測荷重 |
1000N(100kgf) |
2500N(250kgf) |
耐荷重 |
1000N(100kgf) |
2500N(250kgf) |
送り速度 |
10~400mm/min
操作パネルにて、速度を設定 |
ストローク |
400mm |
表示部 |
ドットマトリックス LCD符号付き 4桁 |
表示 |
移動速度表示 |
10~400mm/min |
移動距離表示 |
0.0~400.0mm |
繰り返し回数表示 |
0~9999 |
動作モード |
MANUモード:ドグへの移動 / JOGモード :寸動操作 / SINGモード :ドグ間の1回移動
CONTモード:ドグ間の繰り返し移動 / PROGモード :5点の位置移動 |
通信 |
USB |
USB(パソコン用) |
入力 |
オーバーロード入力 |
FGPX(FGP)のオーバーロード信号で停止 |
測定テーブル |
150×200mm |
使用温度範囲 |
0~45℃(ただし結露しないこと) |
電源 |
AC100V±10% |
質量 |
約63kg |
約65kg |
付属品 |
フォースゲージ用電源ACソケット付、FGPX(FGP)用接続ケーブル、USBケーブル |
パソコンソフト |
無償提供 シンポHPよりダウンロード |
荷重と距離のデータを送信、グラフを表示
トリガ機能付(設定荷重に達した後、データの取込みを開始)
連続データ取込みの回数設定が可能 / 上下限判定機能付 |
その他 |
非常停止スイッチ |
対応フォースゲージ |
FGP-0.2~50,100 |
FGP-0.2~50,100 |
FGPX-0.2~50,100 |
FGPX-0.2~50,100 |
FGPX-250H |