สแตนสำหรับยึดเครื่องทดสอบแรงดึงแรงกด ชนิดพกพา
Automatic Test Stand
Model FGS-HB (SHIMPO)
MADE IN JAPAN
สอบถามสินค้าได้ที่ 02-9744354-6 สายด่วน 088-7777277
Line : @itokin2000.com
Email : salesitokin@gmail.com

FGS-HB Series
Manual Test Stands for Force Gauges (Vertical Type / Handle Operated)
By changing force gauges (push-pull gauges), loads ranging from 2 N to 2,500 N can be measured with this force gauge stand. One turn of the handle moves the carriage approximately 1.33 mm (FGS-100HB), thus measurement can be performed with minute movements. In addition, it is possible to output a signal when an overload is applied to the unit.
A wider range of loads
Loads ranging from 2 N to 2,500 N (0.2-250 kg) can be measured. Various types of force gauges can be mounted.
Note: Force gauges are sold separately.
Longer stroke
The mounted force gauge can be moved by up to 400 mm to perform various types of tests.
Handle operated for minute movement
FGS-100HB: Approx. 1.33 mm per turn of the handle
FGS-250HB: Approx. 0.55 mm per turn of the handle
Load capacity |
1000 N (100 kg), 2500 N (250 kg) |
Supportable force gauges |
FGP Series, FGPX Series, FGPX-H Series |


Specification
形式 |
FGS-100HB |
FGS-250HB |
計測荷重 |
1000N(100kgf) |
2500N(250kgf) |
耐荷重 |
1000N(100kgf) |
2500N(250kgf) |
ストローク |
400mm |
ハンドル一回転 |
約1.33mm |
約0.55mm |
質量 |
約56kg |
測定テーブル |
150×200mm |
対応フォースゲージ |
FGN-0.2~50
FGP-0.2~50,100
FGPX-0.2~50,100 |
FGN-0.2~50 |
FGP-0.2~50,100 |
FGPX-0.2~50,100 |
FGPX-250H |